Necklaces & Collars:

Click for close-up view	Item #F8 Don't Fence Me In-Copper and Sterling Scotty Dog Pendant This is a roll printed 3" x 2 1/2" copper pendant, with a textured sawn out fence showing a precious Scotty Dog. I've used 14 gauge Sterling wire and made hooks with which to hang the piece on an adjustable piece of leather. The necklace can be adjusted from 14" to 24". The entire pendant and fence drop 3 1/4" from the leather. The roll print process includes annealing the metal to make it easier to accept the cut out. I use heavy textured paper which leaves a great background, and cut out the design. This piece of paper is sandwiched between a brass piece and the copper, with a piece of tissue paper on top and rolled through the rollers. View View Price:145
Click for close-up view	Item #F1 Tigereye and Agate Necklace A 1 1/2" Agate donut is the focal piece for this tigereye chip and bead necklace. A 1/4" textured strip of 14 gauge copper has been added to hang the pendant from the center of the 19" necklace. Sterling toggle clasp. Simple and beautiful for any occasion. View Price:75
Click for close-up view	Item #F2 Turquoise and Freshwater Pearl necklace Nice medium chunky turquoise beads, with sterling silver beads beautiful freshwater pearls make this 16" necklace with the Sterling toggle just right for everyday wear. Turquoise beads measure 9x13mm. Pearls are approximately 6mm. Price: 65
Click for close-up view	Item #F3 Sterling and Agate Bezel Set Necklace This is a 20" necklace using five bezel set agate stones into Sterling Silver plaques. After I selected the stones, I formed the fine silver bezel rings around each one of the stones, then soldered them closed. I cut each plaque out with a saw, soldered the fine silver bezels on to each one. I then cut out the backs so that the beauty of the stones would show the translucence of the stones. Finally, I set in the stones and burnished the bezels to keep them in tightly. The necklace measures 20" long, and uses an antique silver over back Russian linked chain. The plaques measure 1 3/4" by 1", 7/8" x 1", 1 7/8" x 1", 1 1/2" x 1", and 1 3/8" x 3/4". This is an outstanding necklace that will complement any outfit or occasion. View of Back View View View of Back View ON HOLD
Click for close-up view	Item #F4 Copper Foldover Necklace-Signed, Sealed, and Delivered This was a fun necklace to make. Everything on the necklace has been made by me, no manufactured pieces. The sections look like little puffy envelopes. I cut each of the square sections out, and after annealing them with the torch, filed, sanded and polished each one. I then drilled holes, folded over the edge on the anvil and hammered the edges with a small hammer. I made the links and the clasp out of 14 gauge Sterling wire. Each of the links was annealed, sanded, and hammered in the middle to make a decorative link and to strengthen them and keep their shape. The necklace measures 18", with each of the links measuring 1 1/2" square. I can add or delete squares according to how long you want this necklace, with a price adjustment. I can also add stones. Each necklace is hand made, and will vary a bit. The design will be the same, but there might be a slight difference in the number of hammer marks, or depth of the foldover. See views of a necklace with earrings that was made for a customer that has stones. View View View View View View View Price: $225
Click for close-up view	Item #F5 Copper Hammered Neck Collar with Hand Torched Beads An exciting and fun design, I'm most pleased with this. I cut a piece of copper and annealed it, then textured it and pierced holes in it. As it started to form under the hammer on my anvil, I discovered that it had to be a collar. Not being really long enough to go around the neck I created two Sterling Silver 'T' shaped pieces, strung some gorgeous hand torched tiger striped glass beads by Mona Hair, added some antique Onyx beads and made the extension. Additional extensions can be purchased so that you can change them according to your outfits. The beaded extension measures 7 1/2" long. The collar measures 1 1/4" wide by 13" long. What a fun piece to wear with that perfect dress or contact me for additional extenders for casual wear. DHT 43 is stamped inside the collar. The last photo shows the collar with agate extension. Price of extensions by request. View View View View View View Price: $250
Click for close-up view	Item #F6 Lucite and Swarovski Bead Neck Collar This 20" long and 1 1/2" wide by 1/2" thick lucite collar is made from 1/4" thick lucite triangles double drilled. There are pink quartz beads spaced along the bottom layer to absorb the shape. At each end there are milk glass beads and clear frosted glass beads and a Sterling silver toggle clasp. This will be great for the summer, so light and fun, and will look great with your Summer wardrobe. View View View Price: $85
Click for close-up view	Item #F7 Fun Lucite Dice Necklace This 16" choker uses 3/4" cube lucite cubes, attached to a strand of Swarovski crystals. A Sterling silver toggle clasp closes it. This will be great for the summer, so light and fun, and will look great with your Summer wardrobe. View View Price: $25

[Continue to Page Two]